Product description
Material: PP + 430 stainless steel
Suitable Spacer: 2mm-8mm/0.08-0.31 in
Tile Thickness: 5mm-20mm/0.2-0.79 in
●Wear-resistant, reusable.
●Easy to use for DIY operation.
●Keep the tile balance on the same horizontal position.
●Improve tile installation speed.
●Reduce installer fatigue/stress.
●Virtually lippage free, flat surface drastically.
●Reduces the need for grinding and polishing.
●Prevents tiles from moving while curing.
1.Paving the first tile, leaving an appropriate distance (use with cross spacer), close to the tiles.
2.Insert T-shaped needle along the gap in the tile.
3.Then 180 degree rotation,T-shaped needle stuck at the bottom of the two tiles.
4.Adjust the caps with your hand/special wrench until the two tiles are on the same level.
5.About 4-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-needle until the word, take out.