About this product
- ระยะเวลารับประกัน:12 เดือน
Product description
• ปุ่ม KIT: เข้าสู่ชุดเมนู ปิดเครื่อง
• ปุ่ม: เปิด/ปิดเครื่องเมโทรนอม
• ปุ่ม TEMPO: ปรับจังหวะของเครื่องเมโทรนอม
• ปุ่ม -: พารามิเตอร์เพิ่ม/ลด
• ปุ่ม +: พารามิเตอร์เพิ่ม/ลด
• ปุ่ม DEMO: เข้าสู่เมนูเพลงเดโม่
• สวิตช์ REVERB: เปิดเอฟเฟกต์
• สวิตช์เปิด: เปิดเครื่อง
• ปุ่มปรับระดับเอาต์พุต/หูฟัง: ควบคุมระดับเสียงเอาต์พุตและหูฟัง
• แจ็ค DC: ต่ออะแดปเตอร์ 9V
• แจ็ค AUXIN (แจ็คสเตอริโอ 3.5): ต่ออุปกรณ์อินพุต เช่น MP3 หรือโทรศัพท์มือถือ
• แจ็คหูฟัง (แจ็คสเตอริโอ 3.5): ต่อเข้ากับหูฟัง
• USB: ต่อเข้ากับคอมพิวเตอร์เพื่อถ่ายโอนสัญญาณ MIDI
• เอาต์พุตโมโน 6.35: ต่อเข้ากับเครื่องขยายเสียง
1. KIT Button: Enter the kit menu Power off
2. Button: Turn on/off Metronome
3. TEMPO Button: Adjust the metronome tempo
4. – Button: Increase/Decrease parameter
5. + Button: Increase/Decrease parameter
6. DEMO Button: Enter demo song menu
7. REVERB Switch: Turn on effect
10. Output/Headphone volume knob: Control the volume of output and headphone
11. DC jack: Connect 9V adapter
12. AUXIN jack ( 3.5 Stereo jack): Connect input device such as MP3 or cellphone
13. Headphone jack ( 3.5 Stereo jack): Connect to headphone
14. USB: Connect to computer to transfer MIDI signal
15. 6.35 Mono output: Connect to Amplifier
16. PDA: Connect with drum cable
1. Connecting an Audio Equipmen
When using an ampliffer, connect the Output L/MONO jack located on the side of the drum Module.
Note: The line output volume is controlled by the LINE OUT I
2. Connecting a set of Headphones
phones can be connected to the PHONES jack located on the side of the drum Module.
Note: The headphones output volume is controlled by the VOLUME knob.
3. Connecting a MP3 Player
Connect MP3 player or other audio source to the stereo AUX IN jack located on the side of the drum Module.
The input signal is mixed with the drum signal, allowing you to play along.
the USB Connector, which can receives and transmits MIDI messages to a computer.
Make sure the power is switched OFF. Connect the adaptor to the DC IN jack on the side panel. After confirming that all connections have been completed, rotate the volume knob to the left(minimum volume level) before switching the power on. Press power button to turn on the drum, the digit tube will show kit number 001.
Power on/off Drum kit: Switch the button to ON location, the LCD will show 001
Drum Kit Selection: There are 20 preset kit, check detail at page
2. Press +/- button to choose the kit you prefer
1. Press L button to start metronome.LCD shows 4-4 (this is the initial beat)
2. Press +/-button, choose the beat you prefer. Beat: 1/2~9/2,1/4~9/4,1/8~9/8
3. Metronome tempo: Press TEMPO button, Press+//-button to adjust the tempo (tempo range: 30-200,the default tempo is 100) All settings in metronome mode will be saved upon power off.
Switch the button from On to REVERB, the reverb function is on
Turn the knob to control the volume of output and headphone (this knob control both output and headphone volume
The inital setting for kick is switch kick, if you want to extend to kick drum pad, please follow below operation:
1. Press DEMO button for more than 3 seconds till the LCD shows 501 and demo song start playing.
2.Press+ button to change the number on LCD to 502
4.Turn of the module and turn it on, the module can work with kick drum pad.