Laminator A3 / A4 เครื่องเคลือบบัตรมัลติฟังก์ชั่น Photo Gluing Machine เครื่องเคลือบบัตรภาพ

Operation Process: 1. Preparation: Insert the plug into the power supply, turn on the power switch, and the motor will start working.  2. Temperature setting: Turn on the heating switch, the temperature rises rapidly, set the knob to the temperature position required for sealing, preheat for about 3 minutes, and the constant temperature light will flash repeatedly, indicating that the internal constant temperature system of the machine is switching between heating and stopping heating, which is a normal phenomenon.  3. Sealing: Insert the card that needs to be sealed into the protective film, insert the already sealed end into the machine, and be sure to place it within the two edges of the card board. 4. Sealing temperature: at 25 degrees room temperature, the thickness of the card protection film is 0.05mm for 110 degrees, 0.07mm for 140 degrees, 0.1mm for 170 degrees. Adjust it appropriately according to the size, thickness, and material of your protective film. 5. Attention: If the temperature is too low and the card is blurry, the temperature should be raised. If the temperature is too high, it can cause wrinkles on the protective film, so the temperature should be lowered. Package: 1 * Laminator Machine 1 * US Plug 1 * Instruction Manual