RECO Solar Panel รีโค่โซล่าพาเนล รับพลังงานแสงอาทิตย์จ่ายไฟให้กล้องวงงจรปิด RECO กันน้ำกันฝน

Solar panel composition and material thickness

1.Solar panel materials: PCB board, solder ribbon, solar cell sheet, EVA, ETFE, black tape,plastic shell, wire PCB: 1.2mm glass fiber

2.Welding tape: 1.2*0.12mm

3.Solar cells:0.18mm thick, 156 monocrystalline solar cells or 158.75 monocrystalline siliconcells

4.EVA: 0.45mm, 0.45mm

5.PET: 1.2mm

6.Black tape: 4.0*185mm

7.Plastic shell: 120.5*173.5*12.5mm8.Wire: 13 core-3m Android wire

electrical performance testing

1. After the solar panels are laminated, they are mainly tested for working power.

2. Solar radiation intensity: 1000W/m2

3.Temperature: 25°C

4. Air quality: AM1.5.

5. Use the power value of the load tester for bareboard load test

6.Humidity:10~90%

Working power test

1. Use electronic load meter, with wire test, when the load is 12.5Ω, the output power ≥ 3.2Wis qualified

2. The light intensity is corrected every 2 hours

Environmental conditions for use andstorage

1. Storage conditions: normal temperature, humidity not more than 60%.

2. Use in an unobstructed outdoor environment under the sun

3. Working environment temperature:-20°C~60°C

4. Using soldering iron temperature: 360±10°C

5. The spot welding time isno more than 3 seconds, and the interval between multiple spotwelding is no less than 30 seconds.