[COD] Akachan inflatable shock absorber, thick type, length 10 meters (available in various widths)**Must be used with an air blower**

Shockproof plastic is used for packing products to protect against shock. Helps reduce damage that may occur during transportation very well.

How to choose product size: Measure the height of the product. And choose a size of shockproof pad that is approximately 4-5 cm wider than the product.Due to after inflation The width of the sheet will be reduced by approximately 4 cm.And the length of the back sheet after inflation will be reduced by about 30%.

How to use:

1.Try wrapping the desired product with bubble wrap. (that has not yet been inflated) then allow for approximately 40-45% more length.

2. Use clips/clamps Clamp the shock pad in the position you want to cut. By clamping the top at the position of the air vent.

3. Blow air into the shock absorber plate at the position with the arrow. Until the sheet is fully inflated

4. Cut the shockproof sheet in the desired position. Without fear of the sheet collapsing because the wind blowing in cannot flow back.

Note: Must be used together with an air blower. Once inflated Unable to remove air and blow again.

**Order 5 packs or more of shockproof pads and get 1 air blower free.